1. Regularly replace lubricating oil: Screw compressors require special lubricating oil to lubricate the screw and bearings. Regularly replacing lubricating oil can ensure the smooth operation of the screw compressor and extend its service life. Under normal circumstances, the lubricating oil replacement cycle is about 500 hours.
2. Check and replace filter elements: Screw compressors are equipped with air filters and oil filters to filter impurities in air and lubricating oil. Regularly checking and replacing filter elements can ensure the quality of air and lubricating oil in screw compressors and reduce the possibility of failure.
3. Check the cooling system: Screw compressors generate a lot of heat during operation, which needs to be dissipated through the cooling system. Regularly checking the cooling system to ensure that it is working properly can prevent the screw compressor from overheating, thereby avoiding performance degradation and failure.
4. Regularly check the electrical system: The electrical system of the screw compressor is responsible for controlling the start and stop and operating status of the compressor. Regularly checking the electrical system to ensure that components such as wires, cables and connectors are not damaged, aged or in poor contact can ensure the normal operation of the screw compressor.
5. Cranking inspection: Regularly inspect the screw compressor, observe the operating status of the screw and bearings, and check for abnormal noise, vibration, or heat. If any abnormality is found, the compressor should be stopped immediately for inspection and repair.
6. Regular cleaning and maintenance: Keep the environment around the screw compressor clean, regularly clean the dust and debris on the compressor, and ensure that the air inlet and exhaust ports are unobstructed, which can effectively extend the service life of the screw compressor.
KAPA has been focusing on screw air compressor solutions for 20 years.
Service hotline: +86-15986632735
Website: https://www.kapaac.com/
