7.5KW / 10HP 0.68m³ / min 16Bar High Efficiency Industrial Air Compressor
Description
More stable, no mechanical transmission failure: high-fficiency permanent magnet synchronous motor and screw male rotor adopt embedded-integrated shaft direct connection,structure, no gear transmission, completely eliminate gear pitting or broken teeth; Two independent permanent magnet motors are integrated directly drive two air ends, no coupling failures.
More energy efficient, the air end is always running at energy-saving speed.
More efficient and fficient permanent magnet motor + no transmission efficiency loss.
More compact: The permanent magnet motor is small in size and the integrated structure saves space.
More comfortable, low running noise, eliminating three sources of noise: no-click bearing noise, no gear meshing noise, no coupling drive noise.
Under the set frequency conversion pressure, the unit will automatically adjust to keep the output pressure within 士0.1 bar, reducing unnecessary waste (the power consumption increases by 7% for every 1 bar of pressure increase).
|
Model |
KB7.5KW-1.6/YC |
| (M³/Min/Mpa) | 0.68/1.6 |
| Power Kw/ HP | 7.5KW/10HP |
| Ambient Temperature ℃ | 2℃-45℃ |
| Cooling Mode | Air Cooled |
| Discharge Temp | ≤Ambient +15℃ |
| Noise Level Db(A) | 65 |
| Driven Mode | Direct Drive |
| Power (V/Ph/Hz) | 380V/3Ph/50Hz or customized |
| Starting Mode | VFS |
| Dimension (mm) | 900*650*870 |
| Net Weight (kg) | 155 |
| Out let Diameter (inch) | RP1/2 |
⊙ Schematics
| 1. Air Filter | 9. Oil Temperature Control Valve |
| 2. Air-in Easing Value | 10. Oil Filter |
| 3. Principal Screw Machine | 11. One-way Shut-off Valve |
| 4. Oil Air Separator | 12. Pressure Gage |
| 5. Oil Air Separating Filter Core | 13. Safety Valve |
| 6. Minimum Pressure Valve | 14. Vent Valve |
| 7. Radiator with Aluminum Alloy Fans | 15. Compressed Air Dry Separator |
| 8. Return Check Valve | 16. Motor |
why choose us
Longer service life of the master machine
The rotor uses asymmetrical line running at a low speed with the support of the ball bearings and roller bearings as a result. The damage and the cost are lowered and the service life is extended. Some force is counteracted by the axial force generated by the bevel gear. So the load on the bearings of the master machine is lowered.
Permanent alignment of the electromotor and the master machine
Different from the strap compressor, the SRC series compressor can integrate the electromotor with flange, shaft coupling box-gear box. and the master machine into one in such way the master machine and the electrometer are aligned forever in the transpiration. The SRC series compressors equipped with effective and fully sealed air-cooling electromotor.
Our products are sold all over the world, you can rest assured.
