5.0m³ / min High efficiency Air Cooling Screw Air Compressor 30kw 40hp 0.8 Mpa
Advantages of screw air compressor
Our screw air compressor is engineered for its durability. Larger rotors allows for bigger bearings, 30%-50% slower rotor speeds results in less power consumption, lower sound levels and reduced maintenance cost .
Our one piece bearing housing ensures both rotors are ridgely held by the bearings in proper alignment during transient periods such as machine startups/shutdowns or load changes. SKF bearings and SEALTECH bearing seals are utilized in all airends
All of our compressors have the latest inlet valve, airend air discharge port and oil inlet port design
Lower sound (dBA) emission level than most of our competitors results in less sound pollution
The axial and rotational loadings are supported by different bearings for better stiffness and less transition noise
Simple package design requires only minimum maintenance for optimum performance
Continuous cooling and circulation of lubricating oil, ensures long airend operating life
Specification
| Model Specification | KB130--40HP |
| Displacement/Pressure (M³/Min/Mpa) | 5.0/0.8 |
| CFM | 176 |
| Power Kw/ HP | 30KW/40HP |
| Ambient Temperature ℃ | 2℃-45℃ |
| Cooling Mode | Air-Cooling |
| Discharge Temp | ≤Ambint+15℃ |
| Lub Oil Capacity Liter | 25.11 |
| Noise Level Db(A) | 68±2 |
| Driven Mode | Direct Drive |
| Power V/Ph/Hz | 380V/50Hz |
| Starting Mode | power frequency |
| Dimension mm | 1250*850*1140 |
| Net Weight kg | 463 |
| Out let Diameter inch | RP1 |
Unique design
Compressed Air Vessel:Reduce the pressure ； energy conservation ； Low oil content ,ensure that the oil content in the air is less than 3ppmand high quality air .
Oil gas separator with built-in oil separation core in new structure .
High efficiency air end , low noise bearing and oil mist cooling are adopted to maintain stable operation of the chamber .
Large surplus heat dissipation area design, strong heat dissipation effect, avoid high temperature shutdown ； Intelligent cooling fan design, can automatically start cooling according to air temperature.
Adopt stainless steel pipe, high temperature and low temperature resistance
electric motor:Adopt imported high quality electrical equipment to ensure the normal operation of the machine.
There is no intermediate transmission, so there is no energy loss
The larger rotor runs at a lower speed, with higher efficiency and further reduces energy consumption
It avoids the situation that the hand is unbalanced in the belt drive, easy to generate heat, easy to break, frequent belt replacement, and often need to readjust the levelness of the pulley and the tension of the belt
Due to the coaxial transmission of elastic coupling, the force is balanced, the vibration is reduced, the reliability is increased and the maintenance cost is reduced
Our services
Pre-sales service
Inquiry and consulting support.
Samples testing support .
Video inspection of our Factory
and products
Our products are sold all over the world, you can rest assured.
