6.05m³ / min Energy Saving Screw Air Compressor 37kw / 50hp 0.8Mpa
|Power Kw/ HP||37KW/50HP|
|Ambient Temperature ℃||2℃-45℃|
|Lub Oil Capacity Liter||23.53L|
|Noise Level Db(A)||78|
|Driven Mode||Direct Drive|
|Starting Mode||power frequency|
|Net Weight kg||610|
|Out let Diameter inch||RP1 1/2|
Type selection of working pressure (exhaust pressure)
When the user is ready to purchase an air compressor, the first thing is to determine the working pressure needed at the gas end, plus a margin of 1-2 bars, and then select the pressure of the air compressor. (This margin is to consider the pressure loss from the installation site of the air compressor to the actual pipeline of the gas end, and to consider the pressure margin between 1-2 bars according to the length of the distance). Of course, the size of pipeline diameter and the number of turning points are also factors affecting pressure loss, the larger the pipeline diameter and the fewer turning points, the smaller the pressure loss; conversely, the greater the pressure loss.
Therefore, when the distance between the air compressor and the gas-end pipeline is too far, the diameter of the main pipeline should be enlarged appropriately. If the environmental conditions meet the installation requirements of the air compressor and the working conditions permit, it can be installed near the gas terminal.
2.1. Transmission (1:1 direct connection) Air end
There is no intermediate transmission, so there is no energy loss
The larger rotor runs at a lower speed, with higher efficiency and further reduces energy consumption
It avoids the situation that the hand is unbalanced in the belt drive, easy to generate heat, easy to break, frequent belt replacement, and often need to readjust the levelness of the pulley and the tension of the belt
Due to the coaxial transmission of elastic coupling, the force is balanced, the vibration is reduced, the reliability is increased and the maintenance cost is reduced
Innovate technology to protect the environment
Kappa listens, understands, and meets the needs of customers
Save the environment, ensure to provide better services and solutions, save costs for users, and seek the largest growth space. The main purpose is to protect and save energy, stimulate the growth of economic productivity, comply with market demand, save energy and reduce environmental pollution. With the mission of "innovation embodies value", Kappa Company will continue to promote technological innovation and progress, achieve win-win with global partners, suppliers and employees, create a new world of "energy saving, environmental protection, intelligence and service" in the aerodynamic field, and strive to be a world-class enterprise with world-class standards.
1. High-quality control(ISO 9001-2000/ISO14001/ASME/Energy saving certificate)
2. Fast Delivery( 10-15 days for large orders)
3. Good service for pre-sale,after-sale( strong technical support and professional after-sales team)
4. Small order acceptable( Ordering quantity according to your actual needs)
why choose us
The longer service life of the master machine
The rotor uses an asymmetrical line running at a low speed with the support of the ball bearings and roller bearings as a result. The damage and the cost are lowered and the service life is extended. Some force is counteracted by the axial force generated by the bevel gear. So the load on the bearings of the master machine is lowered.
Permanent alignment of the electromotor and the master machine
Different from the strap compressor, the SRC series compressor can integrate the electromotor with flange, shaft coupling box-gear box. and the master machine into one in such a way the master machine and the electrometer are aligned forever in the transpiration. The SRC series compressors are equipped with an effective and fully sealed air-cooling electromotor.
Q1: Are you a factory or trade company?
A1: We are a professional manufacturer.
Q2: What is the exact address of your factory?
A2: Our company is located in Zone B, Lianhua County Industrial Park, Pingxiang City, Jiangxi Province of China
Q3: Warranty terms of your machine?
A3: One-year warranty for the machine and technical support according to your needs.
Q4: Will you provide some spare parts for the machines?
A4: Yes, of course.
Q5: What about the voltage of products? Can they be customized?
A5: Yes, of course. The voltage can be customized according to your requirements.
Q6: Which payment term can you accept?
A6: 30% T/T in advanced, 70% T/T against the B/L copy.
Q7: How long will you take to arrange production?
A7: 380V 50HZ we can deliver the goods within 25-30 days. Other electricity or other colors we will deliver within 25-30 days.
Q8: Can you accept OEM orders?
A8: Yes, with a professional design team, OEM orders are highly welcome.
Q9: Which trade term can you accept?
A9: Available trade terms: FOB, CIF, CFR, EXW, CPT, etc.