200kw Two Stage Screw Air Compressor 45.71 m³ / min 3650*1980*2150
Description
Remarkable Air end: Germany original-building Schneider-Sunshine air end adopts the third-generator dissymmetrical gear shape. The main rotor is five gears and the vice rotor is six gears. As the differences between them is small, the loss of circumfluence is small which increases the cubage efficiency by close to 20% and save the electric currency by about 25% compared to normal screw air compressor. The rotor is dissymmetrical shape, supported by ball bearing and rod bead bearing and operating at a low speed so it can lower the maintenance cost and provide the air end with a longer service life Gas Intake valve: Controlled by computer, the stable and dependable air inlet control valve can make the air displacement and power consumption of the motor change along with the air consumption, so as to save energy and electrity, and reduce the operating cost
Oil and air separator: Screw-shaped design of oil and gas separator is easy to uninstall and change. Separator core can separate the left oil in the process of compressing air. After separating, the left oil will be about 1-2 ppm. this will increase the cleanness of the compressed air and lower the pollution to the compressed air and lower the pollution to the compressed air and equipment
Cooling system: The designed super large cool area ensures it working normally at high temperature and hot environment. Good heat transfer performance, little flow resistance and low request for water quality. It is convenient to clean and need no special cleaning fluid.
Motor: Famous brand motor with F class isolation and IP54 protecting class. It uses imported SKF durable bearing and can be operated all day long
Temperature Controller Valve: Designed specially for the high environment temperature and high air humidity, upon cold start up, thermal valve enables the system to reach the best working temperature as soon as possible, and maintains constant temperature and viscosity of lubricant to prevent condensing of evaporated gas and emulsification of the lubricant, which prolongs the service life of the lubricant, rotor of the main machine, bearing and other parts
Specification
| Model Specification | KP200-0.8II |
| Displacement/Pressure (M³/Min/Mpa) | 45.71/0.8 |
| Power Kw/ HP | 200KW/268HP |
| Ambient Temperature ℃ | 2℃-45℃ |
| Cooling Mode | Air-Cooling |
| Discharge Temp | ≤Ambint+15℃ |
| Lub Oil Capacity Liter | 42.3L |
| Noise Level Db(A) | 61.2 |
| Driven Mode | Direct Drive |
| Power V/Ph/Hz | 380V/50Hz |
| Starting Mode | power frequency |
| Dimension mm | 3650*1980*2150 |
| Net Weight kg | 5300 |
| Out let Diameter inch | DN100 |
Advantages:
1. High quality control(ISO 9001-2000/ISO14001/ASME/Energy saving certificate)
2. Fast Delivery( 10-15 days for large orders)
3. Good service for pre-sale,after-sale( strong technical support and professional after-sales team)
4. Small order acceptable( Ordering quantity according to your actual needs)
why choose us
Longer service life of the master machine
The rotor uses asymmetrical line running at a low speed with the support of the ball bearings and roller bearings as a result. The damage and the cost are lowered and the service life is extended. Some force is counteracted by the axial force generated by the bevel gear. So the load on the bearings of the master machine is lowered.
Permanent alignment of the electromotor and the master machine
Different from the strap compressor, the SRC series compressor can integrate the electromotor with flange, shaft coupling box-gear box. and the master machine into one in such way the master machine and the electrometer are aligned forever in the transpiration. The SRC series compressors equipped with effective and fully sealed air-cooling electromotor.
Q1: Are you factory or trade company?
A1: We are factory. And we have ourselves trading company.
Q2: What the exactly address of your factory?
A2: Our company is located in Zone B, Lianhua County Industrial Park, Pingxiang City, Jiangxi Province of China
Q3: Warranty terms of your machine?
A3: One year warranty for the machine and technical support according to your needs.
Q4: Will you provide some spare parts of the machines?
A4: Yes, of course.
Q5: What about the voltage of products? Can they be customized?
A5: Yes, of course. The voltage can be customized according to your equirement.
Q6: Which payment term can you accept?
A6: 30% T/T in advanced, 70% T/T against the B/L copy.
Q7: How long will you take to arrange production?
A7: 380V 50HZ we can delivery the goods within 10 -15 days. Other electricity or other color we will delivery within 25-30 days.
Our products are sold all over the world, you can rest assured.
