9.63m³ / min Energy Saving Screw Air Compressor 18.5kw 25hp 0.8Mpa
Description
Screw air compressor adopts pre-set screw air compressor, which only needs single power supply connection and compressed air connection, and has built-in cooling system, which greatly simplifies the installation work. Screw air compressor consistently provides high-quality compressed air for all walks of life with its advantages of high efficiency, high efficiency, maintenance-free and high reliability and has built-in cooling system, which greatly simplifies the installation work.
Specification
| Model Specification | KP18.5-25P |
| Displacement/Pressure (M³/Min/Mpa) | 2.85/0.8 |
| CFM | 100 |
| Power Kw/ HP | 18.5KW/25HP |
| Ambient Temperature ℃ | 2℃-45℃ |
| Cooling Mode | Air-Cooling |
| Discharge Temp | ≤Ambint+15℃ |
| Lub Oil Capacity Liter | 21.7L |
| Noise Level Db(A) | 75 |
| Driven Mode | Direct Drive |
| Power V/Ph/Hz | 380V/50Hz |
| Starting Mode | power frequency |
| Dimension mm | 1250*850*1140 |
| Net Weight kg | 383 |
| Out let Diameter inch | RP1 |
Introduction of twin screw air compressor
Advanced third generation rotor
Simple air intake control system
High efficiency centrifugal oil-gas separator has little oil content and long service life of oil separation core
High efficiency and low noise suction fan makes full use of outlet dynamic pressure to improve heat transfer effect (air-cooled)
The sound insulation material package reduces the noise to a minimum
Fault diagnosis system and control panel are easy to operate
The door panel is detachable, and the equipment maintenance is convenient
The temperature, pressure and other parameters are closely monitored by electronic micro processing
The instrument display automatic control (standard type) and PLC liquid crystal display automatic control (intelligent type) are adopted. Both of them have various monitoring and protection functions
Realize automatic unmanned operation, intelligent operation, remote control and linkage control
Unique design
1. Transmission (1:1 direct connection) Air end
There is no intermediate transmission, so there is no energy loss
The larger rotor runs at a lower speed, with higher efficiency and further reduces energy consumption
It avoids the situation that the hand is unbalanced in the belt drive, easy to generate heat, easy to break, frequent belt replacement, and often need to readjust the levelness of the pulley and the tension of the belt
Due to the coaxial transmission of elastic coupling, the force is balanced, the vibration is reduced, the reliability is increased and the maintenance cost is reduced
2 External rotor centrifugal fan
Double inlet centrifugal fan with high efficiency, large air volume, low noise and low energy consumption
3. Oil gas separator with built-in oil separation core in new structure
Ensure that the oil content in the air is less than 3ppm
4 Newly designed air intake system
Air intake at normal temperature, energy saving, quiet and convenient maintenance
Innovate technology to protect the environment
Kappa listens, understands and meets the needs of customers
Save the environment, ensure to provide better services and solutions, save costs for users, and seek the largest growth space. The main purpose is to protect and save energy, stimulate the growth of economic productivity, comply with market demand, save energy and reduce environmental pollution. With the mission of "innovation embodies value", Kappa Company will continue to promote technological innovation and progress, achieve win-win with global partners, suppliers and employees, create a new world of "energy saving, environmental protection, intelligence and service" in the aerodynamic field, and strive to be a world-class enterprise with world-class standards
why choose us
Longer service life of the master machine
The rotor uses asymmetrical line running at a low speed with the support of the ball bearings and roller bearings as a result. The damage and the cost are lowered and the service life is extended. Some force is counteracted by the axial force generated by the bevel gear. So the load on the bearings of the master machine is lowered.
Permanent alignment of the electromotor and the master machine
Different from the strap compressor, the SRC series compressor can integrate the electromotor with flange, shaft coupling box-gear box. and the master machine into one in such way the master machine and the electrometer are aligned forever in the transpiration. The SRC series compressors equipped with effective and fully sealed air-cooling electromotor.
Q1: Are you factory or trade company?
A1: We are factory. And we have ourselves trading company.
Q2: What the exactly address of your factory?
A2: Our company is located in Zone B, Lianhua County Industrial Park, Pingxiang City, Jiangxi Province of China
Q3: Warranty terms of your machine?
A3: One year warranty for the machine and technical support according to your needs.
Q4: Will you provide some spare parts of the machines?
A4: Yes, of course.
Q5: What about the voltage of products? Can they be customized?
A5: Yes, of course. The voltage can be customized according to your equirement.
Q6: Which payment term can you accept?
A6: 30% T/T in advanced, 70% T/T against the B/L copy.
Q7: How long will you take to arrange production?
A7: 380V 50HZ we can delivery the goods within 25 -30 days. Other electricity or other color we will delivery within 25-30 days.
Q8: Can you accept OEM orders?
A8: Yes, with professional design team, OEM orders are highly welcome.
Q9: Which trade term can you accept?
A9: Available trade terms: FOB, CIF, CFR, EXW, CPT, etc.
Our products are sold all over the world, you can rest assured.
