KAPA Gaswater separator filters remove air pollution.
Because gases and liquids have different densities, the liquid will be affected by gravity when it flows together. Dust and aerosols, etc., can have a damaging and costly effect on sensitive equipment that uses compressed air. That's why it's important to incorporate air treatment methods, such as gas-water separator filters, and we have two main ways of separation, right
Gravity settlement: Due to the different density of gas and liquid, when the liquid flows with the gas, the liquid will be affected by gravity and produce a downward velocity, while the gas is still flowing in the original direction, that is to say, the liquid and the gas have a tendency to separate in the gravity field, and the downward liquid is attached to the wall and gathered together through the discharge pipe
Centrifugal force separation: due to the different density of gas and liquid, when liquid and gas are mixed together to rotate, the centrifugal force of the liquid is greater than the gas, so the liquid has the tendency of centrifugal separation, the liquid is attached to the separation wall due to the action of gravity to gather together and discharge through the discharge pipe.
Our gas-water separation filter kit installation diagram:
Main filtration separation mode: (Principle and characteristics of gas-water separation filter)
|
|
operating principle | relative merits |
| gravity settling | Due to the different density of gas and liquid, when the liquid flows with the gas, the liquid will be affected by gravity and produce a downward velocity, while the gas is still flowing in the original direction, that is to say, the liquid and the gas have a tendency to separate in the gravity field, and the downward liquid is attached to the wall and gathered together through the discharge pipe |
Advantage： 1. Simple design. 2. The separation efficiency is lowest. 3. Equipment production is simple, 4. Equipment volume is huge. 5. It takes up too much space. 6. Low resistance Cons: 1. The equipment is bulky. 2. It takes up too much space. |
| Centrifugal separation | Due to the different density of gas and liquid, when liquid and gas are mixed together to rotate and flow, the centrifugal force of the liquid is greater than that of the gas, so the liquid has the tendency of centrifugal separation. The liquid is attached to the separation wall due to the action of gravity, and the liquid is gathered together downward and discharged through the discharge pipe.. |
Advantages: 1. The separation efficiency is higher than the gravity settlement. 2. Volumetric gravity settlement is much reduced, so centrifugal separation structures can be used in (high) pressure vessels 3. Job stability Cons: 1. Narrow separation load range |
Consult an air system professional for the best solution for your needs.
